低溫培養箱/Binder/ KB-240

購入時間: 未知,設備地點:台北

委買編號:Z210803016

Quantity:
加入詢價車
BINDER Cooled incubator KB 240 (E5.1) with mechanical convection The most versatile among the cooled incubators for microorganisms: The BINDER KB series cooled incubator controls temperature ranges of -5 °C to 100 °C. With its comprehe...

BINDER Cooled incubator KB 240 (E5.1) with mechanical convection

The most versatile among the cooled incubators for microorganisms: The BINDER KB series cooled incubator controls temperature ranges of -5 °C to 100 °C. With its comprehensive program functions, this cooled incubator offers a wide range of capabilities and delivers reproducible test results.
-Electronically controlled APT.lineTM preheating chamber and patented DCTTM refrigeration system assuring temperature accuracy and reproducible results in both heating and cooling situations
-Temperature range -5 °C to 100 °C
-MP controller with 2 programs with 10 sections each, alternatively switchable to 1 program with 20 sections
-Integrated week program timer with real-time function
-Adjustable ramp function via program editor
-Digital temperature setting with an accuracy of a tenth of a degree
-Adjustable fan speed
-Elapsed time indicator
-Independent adjustable temperature safety device class 3.1, providing full protection against chamber over-temperature, with visual and audible temperature alarm
-Inner glass door
-RS 422 interface for communication software APT-COMTM DataControlSystem
-Adjustable intervals for printer
-4 castors (2 with brakes)
-Access port with silicone plug Ø 30 mm, left side
-2 stainless steel racks
-BINDER test confirmation

Incubator model: cooling incubator
Load max.: 51 – 100 kg
Cabinet type: incubator
Interior volume: 201 – 300 l
Maximum temperature (heat): + 100 °C
Lowest temperature (cooling): – 5 °C
Inner width (incubators,…): 650 mm
Depth inside (incubators,…): 485 mm
Interior height (incubators,…): 785 mm
Depth outside (incubators,…): 800 mm
External height (incubators,…): 1460 mm
Width outside (incubators,…): 930 mm
Shipping weight: 210,00 Kg
BINDER cooling incubator KB 240 (E5.1)
Exterior dimensions
Width (mm) 930
Height (incl. casters) (mm) 1460
Depth (plus door handle, I-panel and connection 100 mm) (mm) 800
Wall clearance, rear (mm) 100
Wall clearance, side (mm) 100
Number of doors (ea.) 1
Inner glass door(s) (ea.) 1
Interior dimensions
Width (mm) 650
Height (mm) 785
Depth (mm) 485
Interior volume (l) 247
Racks (number standard/max.) 2 / 9
Load per rack (kg) 30
Permitted total load (kg) 100
Weight (empty) (kg) 170
Temperature data
Temperature range (°C) 1) -5 – 100
Temperature variation max. (± K)
at 4 °C (± K)
at 25 °C (± K)
at 37 °C (± K)
0,5
0,2
0,2
0,2
Temperature fluctuation max. (± K) 0,1
Recovery time after door was opened for 30 sec 2)
at 4 °C (± K)
at 37 °C (± K)
16
1
Electrical data
IP protection class acc. to EN 60529 IP 20
Voltage (±10 %)
50/60 Hz (V)
50/60 Hz (V)
200-240 V 1N ~
100-120 V 1N ~
Nominal power (kW) 1,2
Energy consumption 3)
at 37 °C (W)
260
Noise level (dB (A)) 52

1) Lower values are valid up to an ambient temperature of max. 25 °C.
2) To 98% of the set value
3) These values can be used for dimensioning air condition systems.

The useable interior height depends on the position of racks.

All technical data are specified for units with standard equipment at an ambient temperature of 25 °C and a line voltage fluctuation of ±10%. The temperature data is determined in accordance to factory standard following DIN 12880, respecting the recommended wall clearances of 10% of the height, width and depth of the inner chamber. All figures are typical average values for series devices. We reserve the right to alter technical specifications at any time.

Read more
請輸入自訂頁籤內容
Back to Top
利友科技股份有限公司 Added to cart
Shopping Cart
Close

購物車內沒有任何商品。